Floor. Monday , April 17th , 2017 - 16:03:53 PM
Once you have your tile, you can pre-cut tiles that will be placed at the edges of the floor if the tile is too large. This means you should do some measuring first. You can also cut the tile while you’re laying it, but then you have to be sure you haven’t laid down the mortar until you’ve made the necessary cuts. Mortar that is only partially dried might not bond with the tile when you set it. You can use a wet ceramic saw or a utility knife to do the cutting. Which you use depends on the thickness of your ceramic tile flooring.
Prepare the Sub-Floor for the Tiling Process. After you are ready with your tools and before you begin tile flooring installation, you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks, you must repair them. If any crack is too large to repair, that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
It’s also important to get the right equipment and tools for the project. You can buy most of the tools and materials you’ll need at you neighborhood hardware store, or home center. For equipment that might over your budget like tile cutters, try asking your local home center or tool rental yard if they have the tools you need for rental. Basic ceramic tiling tools include A pair of safety glasses, heavy leather gloves, tile spacers, notched trowel, a handheld tile cutter, and a pair of tile nippers. Have some sandpaper handy for smoothing out cut edges. Sponges and clean dry rags will come in handy for cleaning and wiping off excess mortar material and grout lining from your newly-finished ceramic tiling floor. Of course, you can always consult a professional if you are hesitant over how to start installing ceramic tile on your floor. From choosing the right tiles and color, to tearing out existing ceramic tile floors without damaging the subfloor, to installing ceramic tile that will last you a lifetime, a home improvement professional will be able to help you with information, at the very least, or assist you when you start installing ceramic tile.
Any content, trademark’s, or other material that might be found on the Constell website that is not Constell’s property remains the copyright of its respective owner/s. In no way does Constell claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.