Norma Oneil. Floor. June 01st , 2017.
Hardwood floors remain popular even now in many houses in the West. You will get plenty of varieties like oak, pinewood, maple wood in the hardwood type each having its own pros and cons. But, it will come for long years without costing you anything over the maintenance cost. Porcelain floors are known for its endurance and rigidity which is available at moderate cost in great designs. Some people believe that, porcelain floors are stronger than hardwood flooring and many contractors recommend for home renovation and improvement plans.
Prepare the Sub-Floor for the Tiling Process. After you are ready with your tools and before you begin tile flooring installation, you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks, you must repair them. If any crack is too large to repair, that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
Final cost estimates of the pre-drawn house floor plans are more likely to be precise because the particulars have been figured out. This means a list of materials has already been made out, for example. The chances of suddenly discovering that the building is beyond the budget after all are fairly small. Sensible buyers would happily save on architect’s fees for designing floor plans. House floor plans that are already in stock are as good as their custom-made counterparts, as they, too, were once custom-made by capable engineers and architects. Moreover, the construction papers will come to hand in a matter of days rather than months.
Sometimes only small adjustments need to be made, a mere few feet, to move a desk from a negative zone to a positive zone, but we can’t know that without an accurate floor plan. Another piece of practical advice I routinely give clients are the yearly zones to be wary of in terms of remodeling or accidents. For example, in the year 2012, the direction of southeast will be very accident-prone. If I have a client who wants to remodel their kitchen in that location and that year, we might consider postponing it or doing some specific counter-measures to diffuse the volatility of that area. But if we aren’t working with an accurate floor plan, then we could misinterpret where a directional zone is within a house. All of these theories apply to commercial spaces as well.
Installing Your Ceramic Flooring Tile Yourself. Installing ceramic tiled flooring is a relatively easy job. There are step by step instructional guides available online if you want to take this task upon yourself instead of hiring a handyman. The basics of installing your flooring are quite simple: the first and foremost thing you must do is measure the tiles and your floor accurately using accurate measuring tools. Then you must calculate, using these measurements of widths and lengths, exactly how many tiles you will need. Then you should mark the center of your floor by drawing lines through the mid-points of the width and the length of your floor; the intersection of these lines, of course, is the center of your floor. You must begin tiling from the center and proceed outwards. Use a tile adhesive or a thin set mortar to bond your tile to the sub-floor; you will need to apply pressure to each tile to let the adhesive work. Grout of the same shade as the tiles needs to be put in after the tiles have set. Each of these processes needs twenty-four hours to dry.
Any content, trademark’s, or other material that might be found on the Constell website that is not Constell’s property remains the copyright of its respective owner/s. In no way does Constell claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.